cGMP, GLP - FDA Approved, ISO-9001, ISO-14001, ISO/IEC 17025, ISO ISO-45001, HACCP, FSSC 22000, FSSAI, "REACH" Registered, Kosher & Halal Certified. We observe WHO Good manufacturing practice and Good laboratory practice.
Search for the supplies that you need here:
------Iron Sucrose and Iron D Saccharate Manufacturers
Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA, Dubai and UAE. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards. We can supply the material in grams for your laboratory trial and in tons for your plant scale jobs.
Our manufacturing facility is FDA approved and cGMP, GLP (FDA) Approved, ISO-9001, ISO-14001, ISO/IEC 17025, ISO OHSAS 18000, ISO 22000-2005 HACCP, FSSAI, FSSC-22000, certified. Apart from good manufacturing practice, we also follow good laboratory practice. We are offering products manufactured as per Kosher and Halal approved certified method. We are pre-registered with "Reach" for export to European countries. We can give all solid chemical materials as per specified size or shape. We observe WHO Good manufacturing practice and Good laboratory practice.
Iron Sucrose & Iron D Saccharate SDS of Manufacturers
CAS Number: 8047-67-4, Molecular Weight: varies, Chemical Formula:varies, EINECS EC Number: 232-464-7, FEMA: ----,明日花绮罗代表作
The names and CAS number for Iron sucrose and Iron saccharate are interchangably used and often there is a confusion.
General Specifications of Iron Sucrose:
Appearance: Reddish deep brown colored amorphous Powder, with characteristic odor and hygroscopic in nature.
Solubility: 10 % w/v Easily soluble in water.
Molecular Weight Determination (By GPC):
(a) The Weight Average Mol. Wt. (Mw): 34,000 - 60,000Da
(b) The No. Average Mol. Wt. (Mn): 24,000 Da.
(c) Index (Mw/Mn): Maximum 1.7
Loss On Drying: 5% maximum at 105C.
Tapped Bulk Density: Between 0.65 and 1.2 w/v.
Specific Gravity at 20C for ( 2%w/v Iron Solution): 1.135 TO 1.165
Bacterial Endotoxin Test: 3.7 EU/mg of Iron maximum.
Alkalinity ( 2%w/v Iron Solution): Minimum 0.5 and Minimum 0.8 mI of 0.1 N HCl
pH (2%w/v Iron Solution): 9.5 to 11.1
Chloride明日花绮罗代表作: Between 335 ppm and 720 ppm.
Water: 5% maximum.
Osmolarity ( 2%w/v Iron Solution): Minimum 1150 mOsmollLit. Minimum NMT 1350 mOsmollLit.
Absence of low Mol. Wt. Fe(II) & Fe(III) (2% w/v Iron solution): No additional peaks are found in polarogram in the test for limit of Fe (II).
Turbidity (2 %w/v Iron Solution): Turbidity should develop between pH 4.4 - 5.3
Limit of Iron(II): Maximum 1%.
Assay of Sucrose By HPLC (2% w/v Iron solution): 79% to 91%.
Assay of Iron on dry basis: Minimum 4.8 % w/w and Maximum 6.4 % w/w.
Total Bacterial count: Maximum 500 CFU/g
Total Yeast mould: Maximum 100 CFU/g
Bacterial Endotoxin: Maximum 100 CFU/g
Total Fungal count: Maximum 50 CFU/g
E. Coli: Absent.
Staphylococcus aureus: Absent.
Pseudomonas aeruginosa: Absent.
Residual Solvent: Maximum 3000 ppm.
Cadmium: Maximum 5 ppm.
Lead: Maximum 5 ppm.
Arsenic: Maximum 3 ppm.
Specifications of Iron Sucrose Injection USP Grade:
Iron Sucrose Injection is a sterile, colloidal solution of ferric hydroxide in complex with Sucrose in Water for Injection. It contains not less than 95.0 percent and not more than 105.0 percent of the labeled amount of iron. Sodium Hydroxide may be added to adjust the pH. It contains no antimicrobial agent, chelating agent, dextran, gluconate, or other added substances.
Packaging and storage: Preserve in single-dose containers of Type I glass. Store at controlled room temperature. Do not freeze.
Complies with specifications of USP Monograph.
Specifications of Iron Sucrose Injection BP Ph Eur Grade:
Action and use: Treatment of iron-deficiency anaemia.
Iron Sucrose Injection is a sterile colloidal solution containing a complex of iron(III) hydroxide with sucrose of average molecular weight between 34000 and 60000.
Iron Sucrose Injection is produced by a method of manufacture designed to provide an iron-sucrose complex with appropriate iron absorption characteristics. This may be confirmed for routine control purposes by the use of an appropriate combination of physico-chemical tests, subject to the agreement of the competent authority.
A suitable test is carried out to demonstrate (1) the amount of iron(II) present in the injection is not more than 0.4% w/v of the total iron content and (2) there are no low molecular weight complexes in the injection.
The injection complies with the requirements stated under Parenteral Preparations and with the following requirements.
Content of iron, Fe: 95.0 to 105.0% of the stated amount.
Content of sucrose: 90.0 to 110.0% of the stated amount.
A. To a quantity of the injection containing the equivalent of 20 mg of iron, add 20 mL of water and 5 mL of hydrochloric acid and boil for 5 minutes. Cool, add an excess of 13.5M ammonia and filter. Wash the precipitate with water, dissolve in the minimum volume of 2M hydrochloric acid and add sufficient water to produce 20 mL The resulting solution yields reaction B characteristic of iron salts.
B In the Assay for Sucrose, the retention time of the principal peak in the chromatogram obtained with solution (1) corresponds to that of the principal peak in the chromatogram obtained with solution (2).
C. Complies with the test for Molecular weight determination.
Complies with specification of BP Ph monograph.
Taloja Mumbai and Ankleshwar, INDIA
Representatives in Houston, Chicago and New York, USA
TEL: (OFF) +91-22-23726950, +9123774610, +9123723564
Copyright and Usual Disclaimer is Applicable
Last updated 4-sep-20明日花绮罗代表作
Exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, etc.
Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.
Fast Selling IP BP Ph Eur EP USP Analytical Reagent FCC Food Grades of Chemicals by Anmol Chemicals
Acetic Acid Glacial --- Aluminum Chloride --- Ammonium bicarbonate --- Ammonium Carbonate --- Ammonium Chloride明日花绮罗代表作 --- Benzoic Acid --- Benzyl Alcohol --- Boric Acid --- Borax; Sodium Borate --- Calcium Butyrate --- Calcium Carbonate --- Calcium Chloride --- Calcium Hydroxide --- Calcium Saccharate --- Carbamide Peroxide --- Calcium Oxide --- Calcium Sulfate --- Chromic Chloride --- Copper Sulfate --- Cupric Chloride --- Ferric Chloride --- Fumaric Acid --- Magnesium Butyrate --- Magnesium Chloride --- Magnesium Sulfate --- Malic Acid --- Maleic Acid --- Manganese Chloride --- Manganese Sulfate --- Octyldodecanol明日花绮罗代表作 --- Oleic acid --- Phenylethyl Alcohol --- Propylene Carbonate --- Potassium Bromide --- Potassium Bicarbonate --- Potassium Carbonate --- Potassium Chloride --- Potassium Hydroxide Pellets --- Potassium Alum --- Selenious Acid --- Sodium Acetate --- Sodium Butyrate --- Sodium Bicarbonate --- Sodium Chloride --- Sodium Molybdate --- Sodium Selenite --- Sodium Perborate --- Sodium Hydroxide --- Sodium Sulphate --- Sodium Sulfide --- Sodium Thiosulfate --- Urea --- Zinc Chloride --- Zinc Sulphate ---
Other Best Selling Products
Ammonium Persulfate --- Butylated Hydroxyanisole --- Butylated Hydroxytoluene --- Sodium Bromate --- Sodium Diacetate -
Iron Saccharate BP Ph Eur USP Grades Manufacturers